专栏名称: Cisco思科CCIE俱乐部
CCIE俱乐部,即CCIE公会,弘扬“CCIE”精神,关注网络专家和相关精英人才的学习,事业和生活。
目录
相关文章推荐
看电视  ·  我们为什么需要脱口秀? ·  1 周前  
51好读  ›  专栏  ›  Cisco思科CCIE俱乐部

CCIE考场题目曝光

Cisco思科CCIE俱乐部  · 公众号  ·  · 2017-09-25 17:51

正文

TSHOOT

Tk1- wrong MAC address on DHCP pool and SW3 SVI 100

Tk2- missing PPP ipcp route default on R17

Tk3- Wrong subnet on R22 and passive interface on R21

Tk4- Prefix list denying traffic from R13 to R14 and missing weight metric on all 4 routers

Tk5- missing Next-hop-self on R22, change local preference for path selection

Tk6- ACL deny traffic on R22

Tk7- R15 missing ip nhrp redirect, R19 wrong nhs, PC108 missing ip domain lookup

Tk8- it was a beast, about 6 faults... missing ip nat inside on R8, wrong NAT statement on R7, neighbor not active on R4, and cost 1000 on both R4 and R6, not redistribution on both R9 and R10

Tk9- Match crypto on both routers 

Tk10- Secondary IP on R24, wrong MAC on DHCP pool, and ip domain lookup on R21

DIAG

H2 = HSRPv6 nothing special 

H2+

Follow Spoto v1.8 %95 worked, some of the traces were spotty from SW10, I had issue with R15 DHCP it was handling 10.2.100.2 IP to R101 for no reason, I did a lot of troubleshooting, it was binding the MAC for no reason. I removed my dhcp configs cleared the binding then re-do the client identifier then IP

Also, there is no "show ip eigrp topology 52.52.52.52 255.255.255.255" on R50, they give you "show ip route 52.52.52.52" on R9 and R10

I didn't do Rib-Scale on EIGRP because I couldn't calculate it. however, the route wasn't showing on R9 and R10... so I decided to do it on all EIGRP routers then I started to see the route

So, just add it.

If you look at the topology you won't be able to read the vrf for JacobsCorp network it's an a very clinky color and no vrf preconfigured on R50,R51 and R52. so you have to be careful with this... I removed the BGP under all routers and re-created it with AS 65001 and local AS 65006

扫一扫,与小编一起探讨CCIE那些事儿~