all faults in spoto, i found one with lil change..
but if u practice spoto well.. can be managed.
1) no vlan 12 added in trunk from SW2.
2) R17 ppp chap username was wrong.
3) Paasive interface on R22 and R3 both interfaces.
4) no metric weight on R12,R13,R14 and R12 ACL deny 5 145.14.14.14
5) 194.1, 8.8, 123.3 was already working but fixed 134.21. on R6 ACL, route map was preconfigured.. lowered the metric from 200 to 100.
6) on R25 int eth 0/0 network advertisement under ipv6 bgp
7) DMVPN issue between R18 and R19.. R18 ip nhs wrong..R19 added permit esp on access-list ofS4/0
8) R14
9) crypto key mis configured.
10) name server in R23
same as sopto, u will find seq #227 . serach icmpv6.type==134. in the drop down list the frame will start from one.. but the first fe80::666 is under line 227..
SAME as per SPOTO, minor changes.. but this is due to preconfig.
question all almost 99% same.
1) VTP was preconfigured.
2) BGP in R17 is preconfigured
3) OSPF in 65002 was missing, and as per qustion requirement u must run ospf under the interfaces.
i did run on all interfaces and made vlan 100,101,911 as passive.. this question is same as per spoto..only part for me ospf pre config was missing.
4) AS 65001 all ospf precobfigured, also in headquater and branch office default-information originate was precobfigured, but always missing added as per question requirement.
5) EIGRP the screen shot for RIB scale was missing, but i added rib-scale, question did said do not use metric while you redistribute.. but i followed spoto solution.
6) ALL eigrp is precobfigured, but in R50,51,52,53,54 loopback was not advertised.
7) MPLS is precobfigure.. will not come up untill u advertise loopback in Jacobs network.
8) VRF forwarding done in R17,19,20,21
9) VRF is configured, but RD missing.. in 65001 also the forwarding is not done..
10) R52 eth 0/1 ip is mis configured.. you must change this..
11) BGP is preconfigured in many routers but router-id missing, also agg add to be added.
